XS3 CC H Checkweigher Combination System

The Hygiene Standard for Highest Demands

While the checkweigher measures product weights quickly and precisely, rejecting "out of tolerance" products, the metal detector reliably detects and rejects products contaminated by metal. Common contaminants detected range from nuts and bolts, right down to small metal filings, staples, needles or pieces of wire. The rejection of "bad" products is ensured by two rejecting devices – a system which allows separate rejection of metal-contaminated and off-weight products.

The checkweighing function is performed using a fully functional and globally proven Garvens XS3 checkweigher. This ensures highly accurate dynamic weight measurement with an accuracy from ±0.2 g.

Product and water build-up is minimised by avoiding level surfaces on the conveyor and weighcell supports, as well as the exclusive use of circular tubes on the horizontal section of the frame. The minimal contact conveyor support clamps and open frame construction facilitate easy cleaning. Seam welding improves hygiene and reduces the risk of bacteria build-up. With the reduced number of support legs, hygienically designed cable runs and an additional "customer's cable" duct, Garvens offer a flexible system specifically to your requirements.

替换为 CM Washdown Combination

适用于恶劣环境的二合一解决方案

适用于恶劣环境的二合一解决方案.组合式金属检测和精密称重系统 - 适用于恶劣冲洗环境的理想关键控制点。C33 WD或C35 WD的出色性能与金属检测相结合，提供了一个防护等级达IP69、节省空间的系统。

紧凑且便于清洁的设计

倾斜表面可防止液体滞留，尽可能减少细菌污染，无需工具即可组装部件，易于维护。

符合食品标准要求

与食品直接接触的所有材料完全符合（EC）第1935/2004号法规、（EU）第10/2011号法规和FDA食品安全法规要求。

缩短了由于清洁导致的停工时间

无需工具，即可无故障地快速拆卸和组装金属检测机和称重输送机，支持快速清洁。

Specifications -XS3 CC H Checkweigher Combination System

Load cell	EMFR
Accuracy (at 3 Sigma)	from ± 0.2g
Checkweighing range	up to 6000g
Throughput (pcs./minute)	max. 400
Approval	"Weights and Measures" design-approval in certain countries / MID certifiable
Product preset memories	200
Weight classification	up to 7 weight zones plus "metal"
Terminal screen	touchscreen colour display, TFT 15", resolution 1024 x 768 pixel (XVGA)
Standard sorting device	2 pushers
Power	115/230 V (AC), single-phase50/60 Hz, 1kVA

Features and benefits

	A single user interface for both systems The main advantage of the 15" colour touchscreen interface is that both systems are controlled from one central point. This simplifies and speeds up data entry, product changeovers, production quality documentation/statistics and operator training. Its intuitive, clear and easy to understand multilingual menu system has a very high operator acceptance. Reduces operator errors, saves time during product changeover, thereby minimising downtime.
	Large selection of data connection ports All production data and statistical information can be made available in real-time within your local network. Production and quality managers can access and review all relevant data from their desks. Enables rapid response to problems and facilitates preventive measures, thereby minimising downtime.
	Maximum sensitivity The metal detector is available in a variety of pass widths and heights, optimised for maximum detection sensitivity and protection of your products.
	Hygienic design The hygienic open design is in line with extremely strict international food processing regulations. All surfaces are curved and have a fine smooth finish which is perfect for frequent washdowns. Enables quick and easy cleaning.
	SQC/SPC software compatibility Allows installation of a wide range of optional software packages for complete production control, remote access and line optimisation, such as FreeWeigh.Net and ProdX Increases line efficiency and reduces product giveaway.
	Fill machine feedback control option The checkweigher’s control software automatically sends a signal to your filling machine to increase or decrease the fill level, bringing it back to exact target weight. Saves money by reducing product giveaway, increases profitability and prevents consumer disappointment associated with underfilling.

A wide range of configuration options, add-ons and accessories make our system your bespoke solution.

小册子

样本期刊 XS2自动检重秤 (pdf - 651 KB)

制药行业的解决方案

我们了解产品质量和工作性能认证是制药行业较关注的问题。梅特勒托利多产品检测部是历史悠久的在线称重设备供应商。Garvens品牌产品和服务能够满足制药行业生产和法规特殊要求。不论是生产药片、胶囊、医用器件、药粉或者药水，我们的产品能够帮助您实现加工和包装过程中的异物检测、产品重量检测和产品包装完整性检...

样本期刊链式自动检重秤 (pdf - 624 KB)

样本期刊 XE2自动检重秤 (pdf - 886 KB)

用于肉禽类食品行业的产品检测方案

保证100%产品质量肉禽类食品加工企业一直面临着日益增长的挑战，既要满足严格的质量标准，还有降低总成本的压力。

样本期刊 CK自动检重秤 (pdf - 739 KB)

设备认证文档包 (pdf - 1 MB)

样本期刊 XS3自动检重秤 (pdf - 648 KB)

样本期刊自动检重秤Ipac (pdf - 2 MB)

样本期刊 XS1自动检重秤 (pdf - 601 KB)